Robert Fulton (November 14, 1765 – February 24, 1815) was an American engineer and inventor who is widely credited with developing the world's first commercially successful steamboat, the North River Steamboat (also known as Clermont). In 1807, that steamboat traveled on the Hudson River with passengers from New York City to Albany and back again, a round trip of 300 nautical miles (560 kilometers), in 62 hours. The success of his steamboat changed river traffic and trade on major American rivers.
Fulton became interested in steam engines and the idea of steamboats in 1777 when he was around age 12 and visited state delegate William Henry of Lancaster, Pennsylvania, who was interested in this topic. Henry had learned about inventor James Watt and his Watt steam engine on an earlier visit to England. In 1800, Fulton had been commissioned by Napoleon Bonaparte, leader of France, to attempt to design a submarine; he then produced Nautilus, the first practical submarine in history. Fulton is also credited with inventing some of the world's earliest naval torpedoes for use by the Royal Navy.
Robert Fulton was born on a farm in Little Britain, Pennsylvania, on November 14, 1765. His father, Robert Fulton, married Mary Smith, daughter of Captain Joseph Smith and sister of Col. Lester Smith, a comparatively well off family. He had three sisters, Isabella, Elizabeth, and Mary, and a younger brother, Abraham.
For six years, he lived in Philadelphia, where he painted portraits and landscapes, drew houses and machinery, and was able to send money home to help support his mother. After the death of his father in 1785, Fulton bought a farm at Hopewell Township in Washington County near Pittsburgh for £80 (equivalent to $13638 in 2018), and moved his mother and family into it.
In early 1786, Fulton developed symptoms of tuberculosis and was advised by an eminent doctor to take an ocean voyage for the benefit of his health. Fulton traveled to Europe, where he would live for the next twenty years. He left for England in the autumn of 1786, carrying several letters of introduction to Americans abroad from prominent individuals he had met in Philadelphia. He already corresponded with artist Benjamin West; their fathers had been close friends. West took Fulton into his home, where Fulton lived for several years and studied painting. Fulton gained many commissions painting portraits and landscapes, which allowed him to support himself. He continued to experiment with mechanical inventions.
Fulton became caught up in the enthusiasm of the "Canal Mania". In 1793, he began developing his ideas for canals with inclined planes instead of locks. He obtained a patent for this idea in 1794, and also began working on ideas for the steam power of boats. He published a pamphlet about canals and patented a dredging machine and several other inventions. In 1794, he moved to Manchester to gain practical knowledge of English canal engineering. While there he became friendly with Robert Owen, a cotton manufacturer and early socialist. Owen agreed to finance the development and promotion of Fulton's designs for inclined planes and earth-digging machines; he was instrumental in introducing the American to a canal company, which awarded him a sub-contract. But Fulton was not successful at this practical effort and he gave up the contract after a short time.
As early as 1793, Fulton proposed plans for steam-powered vessels to both the United States and British governments. The first steamships had appeared considerably earlier. The earliest steam-powered ship, in which the engine moved oars, was built by Claude de Jouffroy in France. Called Palmipède, it was tested on the Doubs in 1776. In 1783, de Jouffroy built Pyroscaphe, the first paddle steamer, which sailed successfully on the Saône. The first successful trial run of a steamboat in America had been made by inventor John Fitch, on the Delaware River on August 22, 1787. William Symington had successfully tried steamboats in 1788, and it seems probable that Fulton was aware of these developments.
In Britain, Fulton met the Duke of Bridgewater, Francis Egerton, whose canal, the first to be constructed in the country, was being used for trials of a steam tug. Fulton became very enthusiastic about the canals, and wrote a 1796 treatise on canal construction, suggesting improvements to locks and other features. Working for the Duke of Bridgewater between 1796 and 1799, Fulton had a boat constructed in the Duke's timber yard, under the supervision of Benjamin Powell. After installation of the machinery supplied by the engineers Bateman and Sherratt of Salford, the boat was duly christened Bonaparte in honour of Fulton having served under Napoleon. After expensive trials, because of the configuration of the design, the team feared the paddles might damage the clay lining of the canal and eventually abandoned the experiment. In 1801, Bridgewater instead ordered eight vessels for his canal based on Charlotte Dundas, constructed by Symington.
In 1797, Fulton went to Paris, where he was well known as an inventor. He studied French and German, along with mathematics and chemistry. Fulton also exhibited the first panorama painting to be shown in Paris, Pierre Prévost's Vue de Paris depuis les Tuileries (1800), on what is still called Rue des Panoramas (Panorama Street) today. While living in France, Fulton designed the first working muscle-powered submarine, Nautilus, between 1793 and 1797. He also experimented with torpedoes. When tested, his submarine operated underwater for 17 minutes in 25 feet of water. He asked the government to subsidize its construction, but he was turned down twice. Eventually, he approached the Minister of Marine and, in 1800, was granted permission to build. The shipyard Perrier in Rouen built it, and the submarine sailed first in July 1800 on the Seine River in the same city.
In France, Fulton met Robert R. Livingston, who was appointed U.S. Ambassador to France in 1801. He also had a scientifically curious mind, and the two men decided to collaborate on building a steamboat and to try operating it on the Seine. Fulton experimented with the water resistance of various hull shapes, made drawings and models, and had a steamboat constructed. At the first trial the boat ran perfectly, but the hull was later rebuilt and strengthened. On August 9, 1803, when this boat was driven up the River Seine, it sank. The boat was 66 feet (20 m) long, with an 8-foot (2.4 m) beam, and made between 2+1⁄2 and 3+1⁄2 knots (5 and 6 km/h) against the current.
In 1804, Fulton switched allegiance and moved to Britain, where he was commissioned by Prime Minister William Pitt the Younger to build a range of weapons for use by the Royal Navy during Napoleon's invasion scares. Among his inventions were the world's first modern naval "torpedoes" (modern "mines"). These were tested, along with several other of his inventions, during the 1804 Raid on Boulogne, but met with limited success. Although Fulton continued to develop his inventions with the British until 1806, the crushing naval victory by Admiral Horatio Nelson at the 1805 Battle of Trafalgar greatly reduced the risk of French invasion. Fulton was increasingly sidelined as a result.
Career in the United States (1806–1815)
In 1806, Fulton returned to the United States. In 1807, he and Robert R. Livingston built the first commercially successful steamboat, North River Steamboat (later known as Clermont). Livingston's shipping company began using it to carry passengers between New York City and up the Hudson River to the state capital Albany. Clermont made the 150-nautical-mile (280 km) trip in 32 hours. Passengers on the maiden voyage included a lawyer Jones and his family from Bethlehem, Pennsylvania. His infant daughter Alexandra Jones later served as a Union nurse on a steamboat hospital in the American Civil War.
The Clermont was the first successful steamboat in America. While it was being built people called it "Fulton's Folly". The Clermont had sails as well as a steam engine. At each end of the boat was a short mast with a small square sail that could be unfurled when needed. The engine was in the center of the boat and was surrounded by cord wood. The engine was 24-horsepower. Above the engine was a tall and slender smoke stack. On each side was a big paddle wheel that was open and uncovered. The diameter of the paddle wheels was 15 feet (4.6 m). The boat itself was 136 feet (41 m) long and 18 feet (5.5 m) wide. Its displacement was 160 tons. Fulton received two patents for his steamboat, one in 1809 and the other in 1811. Some historians have asserted that Joseph-Philibert Desblanc's steamship patent of 1802 had priority over the 1809 patent of Fulton; however, when a claim was made by François Jouffroy d'Abbans, it was not taken up by authorities.