The bagpipe is a woodwind instrument using enclosed reeds fed from a constant reservoir of air in the form of a bag. The Scottish Great Highland bagpipe is well known, but people have played bagpipes for centuries throughout large parts of Europe, North Africa, West Asia, around the Persian Gulf and northern parts of South Asia.
The term bagpipes is also used, though pipers usually refer to the bagpipes as "the pipes", "a set of pipes" or "a stand of pipes".
Bagpipes are part of the aerophone group because to play the instrument, air must be blown into it to produce a sound.
A set of bagpipes minimally consists of an air supply, a bag, a chanter, and usually at least one drone. Many bagpipes have more than one drone (and, sometimes, more than one chanter) in various combinations, held in place in stocks—sockets that fasten the various pipes to the bag.
The most common method of supplying air to the bag is through blowing into a blowpipe or blowstick. In some pipes the player must cover the tip of the blowpipe with the tongue while inhaling, in order to prevent unwanted deflation of the bag, but most blowpipes have a non-return valve that eliminates this need. In recent times, there are many instruments that assist in creating a clean air flow to the pipes and assist the collection of condensation.
The use of a bellows to supply air is an innovation dating from the 16th or 17th century. In these pipes, sometimes called "cauld wind pipes", air is not heated or moistened by the player's breathing, so bellows-driven bagpipes can use more refined or delicate reeds. Such pipes include the Irish uilleann pipes; the border or Lowland pipes, Scottish smallpipes, Northumbrian smallpipe and pastoral pipe in Britain; the musette de cour, the musette bechonnet and the cabrette in France; and the Dudy, koziol bialy, and koziol czarny in Poland.
The bag is an airtight reservoir that holds air and regulates its flow via arm pressure, allowing the player to maintain continuous, even sound. The player keeps the bag inflated by blowing air into it through a blowpipe or by pumping air into it with a bellows. Materials used for bags vary widely, but the most common are the skins of local animals such as goats, dogs, sheep, and cows. More recently, bags made of synthetic materials including Gore-Tex have become much more common. Some synthetic bags have zips that allow the player to fit a more effective moisture trap to the inside of the bag. However, synthetic bags still carry a risk of colonisation by fungal spores, and the associated danger of lung infection if they are not kept clean, even if they otherwise require less cleaning than do bags made from natural substances.
Bags cut from larger materials are usually saddle-stitched with an extra strip folded over the seam and stitched (for skin bags) or glued (for synthetic bags) to reduce leaks. Holes are then cut to accommodate the stocks. In the case of bags made from largely intact animal skins, the stocks are typically tied into the points where the limbs and the head joined the body of the whole animal, a construction technique common in Central Europe. Different regions have different ways of treating the hide. The simplest methods involve just the use of salt, while more complex treatments involve milk, flour, and the removal of fur. The hide is normally turned inside out so that the fur is on the inside of the bag, as this helps to reduce the effect of moisture buildup within the bag.
The chanter is the melody pipe, played with two hands. All bagpipes have at least one chanter; some pipes have two chanters, particularly those in North Africa, in the Balkans, and in Southwest Asia. A chanter can be bored internally so that the inside walls are parallel (or "cylindrical") for its full length, or it can be bored in a conical shape. Popular woods include boxwood, cornel, plum or other fruit wood.
The chanter is usually open-ended, so there is no easy way for the player to stop the pipe from sounding. Thus most bagpipes share a constant legato sound with no rests in the music. Primarily because of this inability to stop playing, technical movements are made to break up notes and to create the illusion of articulation and accents. Because of their importance, these embellishments (or "ornaments") are often highly technical systems specific to each bagpipe, and take many years of study to master. A few bagpipes (such as the musette de cour, the uilleann pipes, the Northumbrian smallpipes, the piva and the left chanter of the surdelina) have closed ends or stop the end on the player's leg, so that when the player "closes" (covers all the holes), the chanter becomes silent.
A practice chanter is a chanter without bag or drones and has a much quieter reed, allowing a player to practice the instrument quietly and with no variables other than playing the chanter.
The term chanter is derived from the Latin cantare, or "to sing", much like the modern French verb meaning "to sing", chanter.
A distinctive feature of the gaida's chanter (which it shares with a number of other Eastern European bagpipes) is the "flea-hole" (also known as a mumbler or voicer, marmorka) which is covered by the index finger of the left hand. The flea-hole is smaller than the rest and usually consists of a small tube that is made out of metal or a chicken or duck feather. Uncovering the flea-hole raises any note played by a half step, and it is used in creating the musical ornamentation that gives Balkan music its unique character.
Some types of gaida can have a double bored chanter, such as the Serbian three-voiced gajde. It has eight fingerholes: the top four are covered by the thumb and the first three fingers of the left hand, then the four fingers of the right hand cover the remaining four holes.
The note from the chanter is produced by a reed installed at its top. The reed may be a single (a reed with one vibrating tongue) or double reed (of two pieces that vibrate against each other). Double reeds are used with both conical- and parallel-bored chanters while single reeds are generally (although not exclusively) limited to parallel-bored chanters. In general, double-reed chanters are found in pipes of Western Europe while single-reed chanters appear in most other regions.
They are made from reed (arundo donax or Phragmites), bamboo, or elder. A more modern variant for the reed is a combination of a cotton phenolic (Hgw2082) material from which the body of the reed is made and a clarinet reed cut to size in order to fit the body. These types of reeds produce a louder sound and are not so sensitive to humidity and temperature changes.
Most bagpipes have at least one drone, a pipe that generally is not fingered but rather produces a constant harmonizing note throughout play (usually the tonic note of the chanter). Exceptions are generally those pipes that have a double-chanter instead. A drone is most commonly a cylindrically bored tube with a single reed, although drones with double reeds exist. The drone is generally designed in two or more parts with a sliding joint so that the pitch of the drone can be adjusted.
Depending on the type of pipes, the drones may lie over the shoulder, across the arm opposite the bag, or may run parallel to the chanter. Some drones have a tuning screw, which effectively alters the length of the drone by opening a hole, allowing the drone to be tuned to two or more distinct pitches. The tuning screw may also shut off the drone altogether. In most types of pipes with one drone, it is pitched two octaves below the tonic of the chanter. Additional drones often add the octave below and then a drone consonant with the fifth of the chanter.